Residential & Commercial Restoration in Lanoka Harbor by Restoration Specialists

Our team performed a comprehensive mold remediation service. This included the containment of the affected area, careful demolition and removal of mold-infested materials such as plywood subfloor, and thorough treatment of remaining structural elements (like wall studs and brick foundation) with an antimicrobial solution. The area was then cleaned and prepared for reconstruction.

We provided a comprehensive attic mould remediation, antimicrobial treatment, and surface encapsulation solution. Our technicians accessed the attic workspace wearing full personal protective equipment (PPE), including particulate respirators, eye protection, and protective suits. We established negative air pressure using commercial HEPA air scrubbers to capture agitated spores and exhaust clean air. Technicians HEPA-vacuumed the exposed roof decking and rafters to lift surface spores, followed by precision spraying of an EPA-registered antimicrobial biocide to neutralize fungal roots within the timber grain. Finally, we applied a protective mould-inhibiting encapsulant across the plywood sheathing and roof trusses to prevent future moisture-driven microbial recurrence.

We provided a comprehensive water extraction, controlled demolition, antimicrobial treatment, and structural drying solution. Our technicians uplifted and disposed of the unsalvageable, water-damaged floor coverings and removed HVAC register vents to inspect the ducting. In the bathroom, we cut out and discarded the waterlogged, mould-contaminated lower drywall and rotted baseboard framing. We treated all exposed concrete slab surfaces, wall cavities, and timber studs with an EPA-registered antimicrobial biocide to neutralize microbial growth. Finally, we deployed commercial centrifugal air movers and high-capacity LGR dehumidifiers to thoroughly dry the subfloor and wall assemblies back to certified dry standards in preparation for put-back reconstruction.

We initiated an emergency water mitigation, containment, and environmental assessment plan. Due to the 1800s construction era, our technicians mandated hazardous material testing (asbestos and lead) on the vinyl floor tiles, mastic adhesives, and plaster walls prior to invasive demolition to ensure safe containment protocols. We mapped the full extent of moisture saturation using digital pin-probe moisture meters across the third-floor floor plane and wall corners. While awaiting certified testing clearance for controlled selective demolition around the failing cast-iron pipe, we established containment barriers, applied an EPA-registered antimicrobial biocide to accessible moisture pathways to prevent mould growth, and staged HEPA air filtration and dehumidification equipment for structural drying.

We executed an immediate sewage biohazard extraction, surface pressure washing, and deep sanitisation protocol. Outfitted in full personal protective equipment (PPE), our technicians extracted remaining wastewater and power-washed the floor tile and floor drain assemblies to remove ground-in sewage residues and organic debris. We applied an EPA-registered hospital-grade broad-spectrum antimicrobial biocide across the commercial toilet fixture, stainless steel grab bars, wall tiles, and flooring to eradicate pathogens and bacteria. Finally, we deployed commercial HEPA air scrubbers alongside axial air movers to deodorise the space, filter airborne contaminants, and dry the tiled surfaces to certified sanitary standards.

Our certified abatement specialists initiated the project by collecting physical material samples for certified laboratory testing, established secure plastic containment barriers with heavy-duty tape to isolate the hallway and work zones from the rest of the home, and safely demolished and extracted the contaminated drywall and flooring down to the bare concrete substrate to ensure the environment was fully abated, decontaminated, and safe for future reconstruction.

We provided a comprehensive structural put-back, drywall repair, and flooring transition restoration solution. Our technicians squared off and patched the lower drywall in the utility closet, finishing the joints and priming the surfaces. We rehung and realigned the closet door, repaired any threshold wear, and prepped the concrete subfloor and flooring edges for final flooring installation and trim put-back.

Our emergency restoration team responded to diagnose and repair the active plumbing leak beneath the kitchen sink, utilized a professional wet/dry vacuum to extract standing water from the cabinetry and kitchen hardwood floors, and assessed the flooded basement to relocate vulnerable storage boxes before initiating a comprehensive structural drying and dehumidification process.

Our emergency remediation team immediately deployed professional-grade vacuum hoses and extraction wands to pull standing water directly from the concrete flooring, performed targeted demolition to remove the water-logged wall paneling and expose the failed plumbing against the cinder block foundation, and cleared all saturated debris to thoroughly prepare the underlying structural framing for the final drying and dehumidification process.

We provided a comprehensive water damage mitigation, controlled demolition, and structural drying solution. Our technicians performed targeted drywall cutouts in the kitchen to fully expose the corroded cast-iron stack, supply lines, and surrounding structural wall studs. Downstairs in the basement, we cleared storage items away from the work zone and inspected the heavily stained drywall and concrete floor around the pipe penetration. We treated all exposed structural framing and moisture-affected surfaces with an EPA-registered antimicrobial biocide to prevent microbial growth. Finally, we deployed commercial centrifugal air movers and high-capacity LGR dehumidifiers to thoroughly dry out the wall cavities and subflooring prior to plumbing replacement and final put-back reconstruction.

Our property remediation team executed a massive whole-home cleanout by safely bagging and loading tons of accumulated household trash, empty cans, ruined furniture, and soiled mattresses into large exterior roll-off dumpsters, while simultaneously clearing hazardous debris and addressing standing moisture in the neglected basement to prepare the residence for full sanitization and restoration.

We executed an immediate water extraction, controlled demolition, and structural drying protocol. Our technicians extracted standing wastewater and removed the non-salvageable, saturated carpet and underlay padding to expose the concrete slab. We removed affected timber base trim and detached tack strips along the wall perimeters to allow wall cavities to breathe. All exposed concrete subfloors, timber wall framing, and affected bathroom fixtures were treated with an EPA-registered antimicrobial biocide to prevent microbial growth. Finally, we deployed commercial centrifugal air movers and high-capacity LGR dehumidifiers across the basement to thoroughly dry structural materials and restore relative humidity to safe standards.