Residential & Commercial Restoration in Barnegat by Restoration Specialists

We provided a comprehensive water extraction, controlled demolition, antimicrobial treatment, and structural drying solution. Our technicians uplifted and disposed of the unsalvageable, water-damaged floor coverings and removed HVAC register vents to inspect the ducting. In the bathroom, we cut out and discarded the waterlogged, mould-contaminated lower drywall and rotted baseboard framing. We treated all exposed concrete slab surfaces, wall cavities, and timber studs with an EPA-registered antimicrobial biocide to neutralize microbial growth. Finally, we deployed commercial centrifugal air movers and high-capacity LGR dehumidifiers to thoroughly dry the subfloor and wall assemblies back to certified dry standards in preparation for put-back reconstruction.

We initiated an emergency water mitigation, containment, and environmental assessment plan. Due to the 1800s construction era, our technicians mandated hazardous material testing (asbestos and lead) on the vinyl floor tiles, mastic adhesives, and plaster walls prior to invasive demolition to ensure safe containment protocols. We mapped the full extent of moisture saturation using digital pin-probe moisture meters across the third-floor floor plane and wall corners. While awaiting certified testing clearance for controlled selective demolition around the failing cast-iron pipe, we established containment barriers, applied an EPA-registered antimicrobial biocide to accessible moisture pathways to prevent mould growth, and staged HEPA air filtration and dehumidification equipment for structural drying.

We executed an immediate sewage biohazard extraction, surface pressure washing, and deep sanitisation protocol. Outfitted in full personal protective equipment (PPE), our technicians extracted remaining wastewater and power-washed the floor tile and floor drain assemblies to remove ground-in sewage residues and organic debris. We applied an EPA-registered hospital-grade broad-spectrum antimicrobial biocide across the commercial toilet fixture, stainless steel grab bars, wall tiles, and flooring to eradicate pathogens and bacteria. Finally, we deployed commercial HEPA air scrubbers alongside axial air movers to deodorise the space, filter airborne contaminants, and dry the tiled surfaces to certified sanitary standards.

We provided a comprehensive water damage mitigation, controlled demolition, and structural drying solution. Our technicians performed targeted drywall cutouts in the kitchen to fully expose the corroded cast-iron stack, supply lines, and surrounding structural wall studs. Downstairs in the basement, we cleared storage items away from the work zone and inspected the heavily stained drywall and concrete floor around the pipe penetration. We treated all exposed structural framing and moisture-affected surfaces with an EPA-registered antimicrobial biocide to prevent microbial growth. Finally, we deployed commercial centrifugal air movers and high-capacity LGR dehumidifiers to thoroughly dry out the wall cavities and subflooring prior to plumbing replacement and final put-back reconstruction.

Our remediation team safely uninstalled and removed the bathroom toilet fixture, tore out the water-damaged tile flooring to fully expose the saturated wooden subfloor surrounding the plumbing flange, and cleared the area of all contaminated debris to prepare the bathroom for structural drying and subsequent plumbing repairs.

We executed an immediate water extraction, controlled demolition, and structural drying protocol. Our technicians extracted standing wastewater and removed the non-salvageable, saturated carpet and underlay padding to expose the concrete slab. We removed affected timber base trim and detached tack strips along the wall perimeters to allow wall cavities to breathe. All exposed concrete subfloors, timber wall framing, and affected bathroom fixtures were treated with an EPA-registered antimicrobial biocide to prevent microbial growth. Finally, we deployed commercial centrifugal air movers and high-capacity LGR dehumidifiers across the basement to thoroughly dry structural materials and restore relative humidity to safe standards.

We executed an immediate Category 3 water mitigation, biohazard extraction, and deep sanitisation protocol. Outfitted in full personal protective equipment (PPE), our technicians utilised commercial truck-mounted extraction wands to remove standing blackwater and bulk solid waste from the concrete floor. We thoroughly pressure-washed and scrubbed the contaminated foundation ledges, plumbing lines, and concrete subfloors using an EPA-registered hospital-grade broad-spectrum antimicrobial disinfectant. Finally, we deployed commercial HEPA air scrubbers alongside high-capacity LGR dehumidifiers and axial air movers to capture airborne bio-contaminants, eliminate foul sewage odours, and dry the basement structure to certified sanitary standards.

Our certified remediation team deployed in full personal protective equipment to safely remove and discard all saturated fiberglass insulation from the ceiling, utilized professional HEPA-filtered vacuums to meticulously clean the exposed wooden floor joists, electrical areas, and concrete flooring to capture mold spores and debris, and installed commercial-grade air movers to thoroughly dehumidify the basement structure and prevent future microbial growth.

We provided a comprehensive water extraction, carpet removal, and structural subfloor drying solution. Our technicians uplifted and discarded the unsalvageable, water-damaged carpeting and saturated padding to completely expose the affected concrete subfloor. We performed detailed moisture mapping across the bedroom floor plane to define the moisture perimeter and treated the stained concrete with an EPA-registered antimicrobial wash to prevent mold and bacterial growth. Finally, we deployed commercial centrifugal air movers and high-capacity LGR dehumidifiers to thoroughly dry the concrete slab to baseline dry standards in preparation for new flooring installation.

Our specialized cleanup team systematically sorted and removed excessive household clutter, debris, and trash from the living spaces, performed deep biohazard decontamination of the heavily soiled bathroom fixtures and overflowing litter box areas, and thoroughly sanitized the hard flooring, adjacent rugs, and HVAC floor vents that were heavily contaminated with animal waste and grime, ultimately restoring the property to a safe, odor-free, and habitable environment.

Our water mitigation technicians immediately deployed to the site to extract standing water from the painted concrete floor using professional-grade extraction wands, carefully maneuvering around heavy furniture to prevent secondary moisture damage, and systematically applied specialized foaming cleaning agents and antimicrobial solutions using pump sprayers to thoroughly sanitize the affected area and contaminated storage bins, ensuring the space was safe and fully prepared for the final structural drying process.

Our team provided comprehensive water damage restoration services, which included initial assessment, demolition of the damaged ceiling and wall sections, thorough debris removal and cleanup from the affected areas, and efficient removal of all waste materials from the property, preparing it for further reconstruction.